Use this guide to select and install a truck bed storage organizer, then check that it fits, stays secured, and holds your gear without blocking bed access or vehicle functions. It is written for truck owners with basic measuring and hand-tool skills; no vehicle modifications are required for most adjustable organizers. Plan for 45-90 minutes, including measuring, installation, and a loaded test. Installation time varies by organizer design and truck configuration.
Get garage and car supplies delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
TruckDuffle Truck Bed Storage Bag – Expands Up to 70 Cu Ft – Weatherproof Cargo Organizer – Waterproof Heavy-Duty Soft-Shell Mate…
- ✔ Capacity: Expands up to 70 cubic feet
- ✔ Material: 840D PVC, nylon, and steel
- ✔ Dimensions: 58 × 50 × 42 inches
DECKED Truck Bed Storage System for Ford F150 (2015-current) 6’6"
- ✔ Compatibility: Ford F-150, 2015-current, 6-foot-6-inch bed
- ✔ Dimensions: 74 × 72 × 12 inches
- ✔ Listed capacity: Up to 2,000 pounds
TacoNets Three Pocket Cargo Net for 2005-2026 Toyota Tacoma
- ✔ Fit: Toyota Tacoma, 2005–2026
- ✔ Design: Three-pocket cargo net
- ✔ Material: 5 mm bungee and premium netting
Difficulty: Beginner | Time: 45-90 minutes
What You’ll Need
Tools & Materials:
- Tape measure
- Truck owner’s manual
- Organizer installation instructions and supplied hardware
- Work gloves
- Flashlight
- Basic hand tools if listed by the organizer manufacturer
- Cargo you plan to store, for fit testing
Knowledge:
- Basic ability to measure a vehicle bed
- Ability to identify factory tie-downs and bed features
- Ability to follow hardware and torque instructions
Park on level ground, switch off the engine, and remove loose items from the bed. Check the organizer’s stated fit range and load rating against your truck and cargo before purchase or installation. If the organizer requires drilling, wiring, or changes to a bed liner, follow the vehicle and product instructions; get qualified help if you cannot verify what is behind the drilling area.
TruckDuffle Truck Bed Storage Bag – Expands Up to 70 Cu Ft – Weatherproof Cargo Organizer – Waterproof Heavy-Duty Soft-Shell Mate…
For buyers who need one covered space for a changing mix of bulky cargo, the TruckDuffle is the most versatile fit in this group. It expands up to a stated 70 cubic feet, making it better suited than the three-pocket TacoNets to luggage, camping equipment, and other large loads. Its tool-free attachment system is also less committed than DECKED’s fitted drawer platform, so it makes more sense when the bed needs to return to open hauling space.The tradeoff is that a large soft-sided organizer is still a large object to manage. At 28.3 pounds, the bag may be cumbersome to install or remove, and using its full volume calls for thoughtful packing. Its attachment points and stability system are intended to help keep cargo in place, but buyers should still secure the load appropriately and check that the bag is compatible with their bed layout. The listing describes waterproof construction while the spec field says water resistant, so we would verify the level of protection needed rather than assume submersion-proof performance.Compared with DECKED, this bag prioritizes adaptable enclosed volume over separated, repeat-access compartments. It is our strongest all-around option for occasional bulk hauling, but it is not the pick for someone who wants small tools sorted into drawers or a minimal organizer that stays unobtrusive.
Pros:
- Expands to a stated 70 cubic feet for bulky cargo.
- Heavy-duty PVC construction with reinforced seams is designed to protect gear from weather.
- Universal-fit positioning and tool-free installation suit a range of truck beds.
- Attachment points and a stability system help keep the bag in place during transit.
Cons:
- Its 28.3-pound weight can make installation and removal less convenient.
- Filling the full expanded volume requires careful packing and cargo management.
- The listing describes waterproof protection but also labels the water-resistance level as water resistant.
Best for: Truck owners who regularly haul bulky luggage, coolers, or outdoor gear and want a removable, weather-resistant storage space.
Not ideal for: Drivers who need individual lockable tool compartments, a lightweight organizer, or a permanent drawer layout tailored to a specific truck.
Bottom line: Choose TruckDuffle when flexible, high-volume covered storage matters more than drawer-style access or a compact footprint.
“Choose TruckDuffle when flexible, high-volume covered storage matters more than drawer-style access or a compact footprint.”
DECKED Truck Bed Storage System for Ford F150 (2015-current) 6’6"
DECKED is the most structured organizer here: its full-length drawers separate stored gear from the open bed, so tools and frequently used equipment can have a consistent place instead of being buried beneath cargo. The listing describes six compartments and a 2,000-pound capacity, making this a different kind of solution from TruckDuffle’s flexible volume. Buyers who repeatedly carry similar equipment in a compatible F-150 may value the predictable organization more than a removable bag.Fit is the first constraint. This version is listed for a 2015-current Ford F-150 with a 6-foot-6-inch bed; owners of another truck or bed length should not assume it will fit. Installation is also more involved than attaching TruckDuffle or hooking TacoNets to factory rails, and the product details caution that it may take effort. The listed weight of five pounds is unusual for a full-bed system, so we would confirm the current product specifications with the seller before planning installation.There are practical limits even after installation. DECKED is described as weatherproof, but its drawers are not airtight, and the locking mechanism requires an optional accessory. Compared with the bag, it gives more organized access but less flexibility for removing the organizer; compared with TacoNets, it is a much more substantial solution for buyers whose vehicle and routine justify it.
Pros:
- Full-length drawers provide structured access to stored equipment.
- Six listed compartments help separate tools and gear.
- Designed for a stated load capacity of up to 2,000 pounds.
- Uses recycled HDPE and includes a lifetime warranty, according to the supplied description.
Cons:
- Compatibility is limited to the listed F-150 model years and 6-foot-6-inch bed.
- Installation may require substantial effort and is less flexible than a soft bag or cargo net.
- Drawers are not airtight, and the locking mechanism requires an optional accessory.
Best for: Owners of a compatible 2015-current Ford F-150 with a 6-foot-6-inch bed who want dedicated drawer storage for tools and recurring gear.
Not ideal for: Owners of other truck models or bed lengths, occasional haulers who need a removable organizer, or buyers who require airtight or included locking storage.
Bottom line: For the specified F-150 fit, DECKED is the clearest choice for ongoing drawer-based organization, provided the installation and non-airtight drawers suit your needs.
“For the specified F-150 fit, DECKED is the clearest choice for ongoing drawer-based organization, provided the installation and non-airtight drawers suit your needs.”
TacoNets Three Pocket Cargo Net for 2005-2026 Toyota Tacoma
TacoNets takes the simplest approach: three pockets use space along the bed rails to keep smaller items from roaming around. It is not a substitute for TruckDuffle’s covered bulk storage or DECKED’s drawers; its value is keeping modest, loose cargo grouped without adding a large organizer across the bed. The direct attachment to factory bed rails also avoids the separate hardware noted for many accessories.This is the most vehicle-specific pick in the lineup. It is listed for 2005–2026 Toyota Tacoma trucks, so other truck owners should skip it, and Tacoma buyers should still confirm their exact bed and rail configuration. Because the net is open, it does not provide weather protection, concealment, or a secure enclosure. Its three pockets may also feel limiting if you need to carry a broad variety of tools or larger gear.Compared with the other two products, TacoNets gives up capacity and protection to stay compact, quick to attach, and focused on small-item containment. That makes it a practical complement for everyday loose cargo, not the best single organizer for long trips or expensive equipment. Choose it when reducing clutter is the goal; choose TruckDuffle or DECKED when you need more comprehensive storage.
Pros:
- Designed specifically for listed Toyota Tacoma model years.
- Attaches to factory bed rails without additional hardware.
- Three pockets create simple separation for smaller cargo.
- Compact format leaves more of the bed available than a drawer platform or expanded bag.
Cons:
- Vehicle fit is limited to the listed Tacoma application.
- Three pockets may not provide enough organization for varied or bulky loads.
- Open netting does not enclose cargo or provide weather protection.
Best for: Toyota Tacoma owners who want a compact way to separate small, loose items using factory bed rails.
Not ideal for: Non-Tacoma owners, buyers carrying bulky gear, or anyone who needs weatherproof, concealed, or lockable storage.
Bottom line: TacoNets is the no-fuss choice for small-item organization in a compatible Tacoma, but it cannot replace enclosed storage.
“TacoNets is the no-fuss choice for small-item organization in a compatible Tacoma, but it cannot replace enclosed storage.”
As an Amazon Associate we earn from qualifying purchases.
Before You Start
Identify your truck’s bed length, cab configuration, and bed style, including any tonneau cover, canopy, spray-in or drop-in liner, rail system, wheel-well boxes, or factory cargo management system. These can affect fit. Do not assume two trucks with the same model name have identical bed dimensions or tie-down locations. Use the organizer maker’s compatibility list and installation directions as the final authority.
Decide what the organizer needs to do. A sliding drawer system suits tools or equipment that need weather protection and frequent access, but it can be heavy and reduce usable bed space. A divider or adjustable bar is lighter and helps stop cargo from shifting, but may not provide a lockable compartment. A portable box or bin is easy to remove, though it must still be restrained. Never treat an organizer as a substitute for securing cargo.
Step-by-Step Instructions
Step 1: Measure the bed and map obstructions
Measure the bed’s usable length along the floor, width between the sidewalls, and width at the wheel wells. Record the distance between tie-down points and the height available below a tonneau cover or canopy. Measure with the liner in place because it takes up space. Note the location of bed rails, plugs, lights, drain paths, wheel-well humps, and any existing accessories. Compare these figures with the organizer’s required dimensions and fit chart.
Tip:Check the product’s measurement method. Some manufacturers give outside dimensions while others list the space required for installation or drawer travel. Confirm that drawers, lids, or dividers can open without hitting the tailgate or cover.
Check: You have a written set of bed measurements and have identified any feature that could interfere with installation or access.
Step 2: Choose an organizer for your cargo and use
Match the organizer type, materials, and load rating to your intended cargo. Select a divider or adjustable cargo bar for bulky loads that need separation, a secured tote for removable gear, or a drawer system for equipment that needs regular access and weather protection. Check the maximum load, mounting method, corrosion resistance, and whether the product works with your liner and cover. For outdoor or dusty use, check the maker’s claims and care instructions rather than assuming a lid is waterproof.
Tip:Account for both the organizer’s weight and the cargo weight. The combined load must stay within the truck’s payload limit and any product-specific limit. A heavy drawer system can use a substantial part of available payload.
Check: The product’s stated dimensions and mounting method match your truck, and its ratings suit the cargo you plan to carry.
Step 3: Prepare the bed and inspect the mounting points
Remove loose cargo and sweep dirt, gravel, and debris from the bed floor. Dry wet areas before fitting adhesive-backed parts or a floor-mounted system. Inspect the intended mounting points for damage, rust, or trapped liner material. Locate the owner’s manual guidance for bed-mounted accessories and confirm that the attachment points are approved for the organizer. Set out the hardware and compare it with the product parts list before assembly.
Tip:Do not cover drain holes, electrical connectors, factory labels, or access panels. Do not rely on a bed liner, friction, or adhesive alone to restrain a heavy organizer unless the organizer’s instructions specifically call for that installation.
Check: The bed is clean and dry, the mounting areas are accessible and undamaged, and all required parts are present.
Step 4: Assemble the organizer as directed
Lay out components on a clean surface and assemble them in the order shown in the product instructions. Keep fasteners separated by location, and use only supplied or manufacturer-approved hardware. Start threaded fasteners by hand to prevent cross-threading. Leave adjustable joints slightly loose until the organizer is positioned in the bed, unless the instructions specify a different sequence. Do not force parts into alignment.
Tip:For a long drawer system or bulky assembly, ask another person to help lift it. Use safe lifting technique and avoid placing fingers under the assembly while lowering it.
Check: The assembly is square, all parts face the correct direction, and no fastener is damaged or missing.
Step 5: Position and secure the organizer
Place the organizer in its intended position without dragging it across the liner or painted surfaces. Align its brackets with the approved bed attachment points and check clearance at the wheel wells, tailgate, and cover. Install and tighten the specified fasteners in the sequence and to the torque stated by the manufacturer. If no torque is provided, do not guess for a vehicle-mounted fastener; ask the organizer maker for guidance. Keep the organizer clear of wiring and do not drill unless the product instructions and vehicle guidance permit it.
Tip:Do not overtighten hardware against a plastic liner or thin bed panel. If the supplied mounting method does not fit your bed configuration, stop and confirm an approved alternative rather than improvising.
Check: The organizer sits level, mounting points are fully engaged, and the unit does not shift when you push it firmly by hand.
Step 6: Adjust dividers, drawers, or restraints
Set dividers to the dimensions of the items you carry, leaving enough room to load and remove them. For drawer systems, open and close each drawer fully and test its latch or lock. Attach any included straps or cargo bars at the intended points. Keep heavy items low and close to the cab, and use separate tie-downs for cargo that could move, tip, or become a projectile. Do not exceed the organizer’s load limit or the truck’s payload limit.
Tip:Check the tailgate and cover with the organizer in its final position. A cover that closes over an item may still press on it or prevent proper latching.
Check: Moving parts work freely, dividers hold their settings, and planned cargo fits without blocking latches or vehicle access.
Step 7: Load the organizer and perform a stationary check
Load a small amount of representative cargo first. Close and latch every drawer, lid, divider, and tailgate as applicable. Push and pull each item gently to check for shifting, then inspect the organizer’s mounts again. Verify that the load does not obstruct rear visibility, lights, license plates, the tailgate, or any required safety equipment. Remove any item that exceeds a rating or cannot be restrained.
Tip:Do not road-test a loose load. Secure items with rated tie-downs attached to suitable vehicle anchor points, not to a storage lid or divider unless its maker rates that component for cargo restraint.
Check: Nothing slides during a firm hand check, closures latch, and the installed unit does not interfere with truck functions.
Step 8: Recheck after a short drive
Drive a short, low-speed route with the bed loaded within the ratings. Listen for rattles and watch for movement. Park safely, then check the mounting hardware, organizer position, latches, and cargo restraints. Tighten or adjust only as directed by the manufacturer. Repeat the inspection after the first trip and periodically, especially after carrying a heavy load or driving on rough roads.
Tip:If you hear a new impact or notice movement, stop in a safe place and inspect before continuing. Do not assume the organizer will settle into place.
Check: The organizer remains in position, fasteners and latches stay engaged, and cargo has not shifted after the drive.
Common Mistakes to Avoid
- Putting cargo in the organizer without restraining it. — Use suitable tie-downs and keep heavy items low. Treat dividers and drawers as storage aids, not automatic cargo restraints.
Troubleshooting
Problem: The tonneau cover or tailgate will not close correctly.
Solution: Remove cargo and identify the interference point. Reposition the organizer only within its approved mounting range, or choose a compatible model. Do not force the cover or tailgate closed, as this can damage the truck or organizer.
What Success Looks Like
The organizer fits the measured bed and clears the wheel wells, tailgate, cover, and vehicle features. It is mounted with approved hardware, does not shift under a firm hand check, and its drawers, lids, dividers, or latches operate normally. Cargo stays within vehicle and organizer ratings, is separately restrained where needed, and remains in place during a short test drive. No new rattles, blocked lights, exposed wiring, or obstructed vehicle controls are present.
Next Steps
Keep the installation instructions and any special tools with the truck records. Follow the maker’s schedule for checking fasteners, cleaning, lubrication, seals, and locks. Reinspect the setup after moving the organizer, changing the bed liner or cover, or carrying a different type of load. Remove the organizer before hauling cargo that exceeds its capacity or needs the full bed. Contact the organizer manufacturer or a qualified installer if mounts loosen repeatedly, parts crack, or fitting requires an unapproved vehicle modification.
Frequently Asked Questions
How do I know which truck bed organizer will fit my truck?
Measure the usable bed length and width, width between wheel wells, tie-down locations, and clearance below any cover. Include the installed liner and accessories in those measurements. Match them to the organizer’s fit chart and confirm the exact truck year, bed length, and configuration with the manufacturer.
Can I install a truck bed organizer over a bed liner?
Some organizers are compatible with spray-in or drop-in liners; others require spacers, different fasteners, or a specific mounting surface. Check the product instructions. Do not cut a liner or fasten through it unless the vehicle and organizer makers approve that method.
Do organizers keep cargo from moving without tie-downs?
No. Dividers can separate items and drawers can contain gear, but neither automatically makes cargo safe in a collision or sudden stop. Secure cargo with appropriate straps at suitable truck anchors, and follow the vehicle and organizer load limits.
Will a truck bed organizer fit under a tonneau cover?
It depends on the organizer’s installed height and the cover’s clearance. Measure the lowest point beneath the closed cover and check whether the cover needs space to operate. Test closure without cargo before driving, and never force a cover against the organizer.
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
