How to attach a flag to your truck bed

How to attach a flag on your truck bed? Well, you need to strongly attach a flag pole before mounting a flag on your truck. Moreover, you need to adhere to certain rules and regulations that are fixed by the federal flag code.

Flying a flag on your truck bed is a matter of pride in what the flag represents. If the flag is not properly mounted, the pole can break or you can have problems at an overpass when you maximize the speed of your truck.

If you want to show your pride, then do the job right the first time you mount a flag on your vehicle so that there are not any problems down the road. You can have fun with the flags as they make a great statement at tailgate parties, too.

It is not a traffic violation if you want to fly the American flag on your truck. However, it could be a patriotic issue if certain aspects left unchecked. So, before mounting a flag on your truck, you need to know the rules by which you can mount it without facing any further hassles.

Tips to fly a flag on your Truck Bed

Here are a few tips that will help you fly a flag on your truck bed.

Federal flag code states that you should not attach a flag over the hood, top, sides, or back of a vehicle. Instead, “when the flag is displayed on a motorcar, the staff should be firmly fixed to the chassis or clamped to the right fender.”

In most cases, you have to make sure that the flag is attached on the right as the vehicle is moving forward. However, it is generally also considered acceptable to mount a US flag on both sides of the vehicle if you want to display two flags on your vehicle.

SEE ALSO:  How Much Does A Golf Cart Cost? (Read This First)

If you want to mount a flag on the roof of a vehicle, then it is recommended to either mount the flag on center of the roof or on the passenger side of the vehicle. It is also recommended to mount the US flag in the center of a row of odd-numbered flags on the roof of a vehicle as long as it remains higher than the other flags.

If you are mounting multiple flags on your vehicle, then remember, no other flag that you display on your truck should be in a higher position than that of the US flag, according to flag code.

Flag code also restricts the display of a flag in a manner in which it could easily get dirty or damaged: “The flag should never be fastened, displayed, used, or stored in such a manner as to permit it to be easily torn, soiled, or damaged in any way.”

Always make sure that your flag does not in any manner obstruct your view or the view of other drivers; this is very dangerous and also could be illegal.

It is a matter of good flag etiquette that you should not allow the flag to touch the ground when you display it or move it.

Always remember that your flag is secure and won’t become loose, wherever you want to display it on your vehicle.

When your flag becomes too damaged to continue to display, it is acceptable to retire the flag with proper honour. This  is often done by burning the flag. Some veterans groups will also allow you to drop off flags to be “retired” in an official ceremony.

How to attach a flag on your truck bed

Step 1

The first step to attach a flag on your truck bed would be to make a plan on the type of pole you want to use for flying the flag. If you are planning on driving with the flag on display, you will need a stronger mount and pole. Always make sure that the height of the pole does not exceed over 6 feet tall. If your flag pole is over this height then you will have difficulty with some overpasses. For a 3-by-5-foot flag, a strong, hollow pole will be perfect.

SEE ALSO:  Top 10 Reasons Why You Should Buy a Pickup Truck?

Step 2

The next step would be to line up the pole mount on the bed of the truck. If you put the pole closer to the cab of the truck, it will give you extra support while driving down the highway because less part of the pole will be in the wind.

Step 3

The third step is to drill holes for the pole mount and fix the bolt into right place. For extra reinforcement, you can spot weld the mount to the bed of the truck.

Step 4

The next step is to slide the flagpole into the pole mount. For this you can drill a ¼-inch hole horizontally through the mount and flagpole. However it is not required for a pole mount with a set screw. Then slide the latch pin in place, or tighten the set screw, which will prevent any lift on the flag pole while driving.

Step 5

Lastly mount the flag onto the flagpole. If you want to remove the flagpole, you can unfasten the latch pin or loosen the set screw and then lift the pole up and out of the bracket.

More Related Question And Answers

How can you fly a flag behind your truck?

You must be wondering how to fly a flag from a Truck Bed plan out of the type of pole you want to use for flying the flag. For this you need to line up the pole mount on the bed of the truck. Then drill holes for the pole mount and fix the bolts into place. You ca now slide the flagpole into the pole mount. Finally, mount the flag onto the flagpole.

Can you drive fast with a flag?

Can you drive fast with a flag attached to your truck bed? Yes, you can drive at 65 miles an hour with your aero dynamic technology that some companies offer. You can attach a flag pole having a height of almost 8’ft tall. This type of flag remains over the roof of most of the vehicles and can still fly even when you’re going very slowly.

SEE ALSO:  Best Fuel Economy Pick Up Trucks in 2021: You Should Check Out

What does a flag on your vehicle signify?

Most of the flags on our vehicle indicate a few unresolved problems like vehicle emissions, insurance compliance, parking ticket, red light, and speed or toll violation. The presence of a flag on your vehicle’s record will keep you away from completing certain types of MVA transactions such as renewing your vehicle’s registration.

How can I keep a flag from fraying?

You can remove the flag from its pole outside and then lay it flat on your work surface. Moreover, you can inspect the fraying area to decide whether the flag can be repaired. You can just lay a piece of waxed paper underneath the fraying area and apply a thin layer of fabric adhesive over the fraying area.

How can I secure a flag to a pole?

You can attach a Flag to a Flagpole Using Cable Ties. You can simply place a cable tie through the grommet and secure onto the flagpole.

What side do you fly the American flag on a truck?

The US flag should be displayed with the stars in the upper left-hand corner; however there is an important exception. A flag displayed on the passenger side of a vehicle should have the stars at the upper right-hand corner.

What do the stripes on the flag signify? 

The stripes on the flag signify the original 13 Colonies and the stars represent the 50 states of the Union. The colours of the flag are also symbolic; red represents hardiness and valour, white signifies purity and innocence, and blue stands for vigilance, perseverance and justice.

What are the three items in the ball of a flagpole?

The three items in the ball of a flagpole are a razor blade, a match, and a bullet. You should and must use the razor blade to cut the stars and stripes from the flag, the match to burn the remains, and the bullet to defend the base or shoot yourself, depending on the circumstance.

Las but not the least, by now you have a clear idea on how to attach a flag to your truck bed.

Leave a Comment